• \\"\\\\"\\\\"\\"

     

  • 中文- Welcome to NAKIN Company Vacuum Oil Purifier Pioneer -


Contact

Home -> Technical Support -> ClassificationClassification

Oil purifier's Security System

FromNAKIN OIL PURIFIER Published people:admin Release time2012-08-22 11:36:30

Safety work is most important for each equipment. In the oil purifier field, the safty work includes several items as following:
1.The machine operation system is safety, when we design the oil purifier working function, we must make sure the control circuit safety, the basic working principle, the heater should be interlocked with the oil pump, heat only works when oil pump working, it stops the heater idle-heating and over-heating.
2. The level sensor should be interlocked with inlet solenoid valve and outlet oil pump, when oil level reach to vacuum separator’s top-level-line, the inlet solenoid valve close and oil pumps, so it can make sure inlet and outlet oil quantity always balance, avoid oil escape from vacuum pump.
3. Oil foam eliminating system: NAKIN Vacuum oil purifier much water, it will form the oil foam in vacuum separator, if the oil foam is too much, it will be easy to be suction into vacuum pump, which will break the vacuum pump lubricating system. oil foam eliminating system can automatically eliminate oil foam, make sure machine working continuously.
4. Over-pressure protecting system: NAKIN oil purifier equips the Over-pressure protecting system, the oil purifier has the pressure switch, we can set the oil purifier highest working pressure, when machine reach to the highest pressure, the machine will stop work. This system can make sure machine always working under safety pressure.
5. Motor-overload-alarm system, NAKIN oil purifier has the thermal-relay for each motor, when motor works overload, the audio-alarm will work to mention the operator.