• \\"\\\\"\\\\"\\"

     

  • 中文- Welcome to NAKIN Company Vacuum Oil Purifier Pioneer -


Contact

Home -> Technical Support -> ClassificationClassification

How to Filter Waste Motor Oil

FromNakin company Published people:admin Release time2012-10-24 15:58:34

Car owners know how much motor oil they go through each year with oil changes about every three months. Going through so much motor oil seems wasteful in a time when everyone is trying to conserve in any way they can, including reusing motor oil. When motor oil is removed from the car, it is filled with waste and debris from the inside of the engine. To reuse this oil, you need to filter it so you have clear oil again.

  • 1 Pour all the used oil into one of the glass jugs. Place this jug on a shelf.
  • 2 Place the empty jug down a level from the full jug. The top of the empty jug should be even with the bottom of the full jug.50mL amber serum vials at wholesale Amber serum vial packaging supplies
  • 3 Place one end of the rope at the bottom of the empty jug.
  • 4 Loop the rope up, using nails or pins to secure the rope to the wall, but do not pinch the rope. Place the other end of the rope to the bottom of the full jug. The rope should not touch the top of either bottle.
  • 5 Watch as the oil draws up the rope slowly. Once the oil begins its downward decent, it will move a little faster, but the entire process will be slow. The contaminants will remain in the rope, while the clean oil runs into the bottom jug.
  •